Traceable Maxi Duct Rodder is an ideal accessory for utilisation with pipe & cable locators, to EXTEND the capability of the locating equipments to identify location & route of buried non metallic ducts or telecom pipes.   The Traceable Maxi Duct rodder is based on a sturdy composite fiberglass rod of 9mm dia with a built in 1mm copper wire that is rigid yet flexible enough to guide into non metallic HDPE ducts, plastic pipes and metal pipes upto lengths of 300 meters / 1000 feet.   The traceable duct rodder is provided in a galvanized metal tube frame with an integral brake and wheels. The base of the traceable rod contains a terminal that provides a connection to the inbuilt copper tracer wire of the duct rodder. The traceable rodder when energized with a frequency excites the full length of the rodder to enable trace the buried pipe.   Use any Digital Pipe & cable locating receiver to trace the route of the Pipe. Available in two length options : 200m/650feet and 300m/1000feet. You can contact me zhwpa18@hotmail.com STEP 1 : Insert rod into manhole and push into metallic or non metallic pipe /duct which is to be route traced. STEP 2 : The terminal box of the PipeTraker provides the connection to the inbuilt copper trace wire of the duct rodder. STEP 3 : Energise the traceable duct rodder with any frequency such as 8/ 16/33/64 /80 KHz etc using any signal excitor/ transmitter. STEP 4 : Trace route, depth or blockage points of underground conduit with precision using any digital or analog receiver. Glass fiber rod diameter(mm) φ8mm/φ9mm/φ10mm/φ11mm/φ12mm/φ13mm/φ14mm/φ16mm Length(m) 100m-300m Color Yellow/red/black/blue/green/white Frame(mm) 1000 x 470 x 1140, 1230 x 470 x 1350 Material 75-80% E-glass fiber +High density polyethylene(outer) Feature Add metal(copper wire, stainless steel wire)in the rod for detectable purpose Packing Wrapped and then carton box Inner coper 1mm or 0.5mm