GJS-D1001-24C
Dome Fiber Optic Splice Closure
Product Description
The GJS-D1001 Dome Fiber Optic Splice Closure are closures which accommodate the joint part of the cable, that can be used in manhole, in handhole, aerial-hanger, wall-mounting or be directly buried. Each splice case has three Cable Entry Ports.
The box is made from the high-quality PC and with the mechanical Sealing Structure filled with Silicon Gum Material. It can be opened after sealing and can be reused
Application:Aerial-hanger, Wall-mounting, Direct Buried
Specification
Item | GJS-D1001 |
Dimension ( mm ) |
Φ85 × 330 |
Weight ( Kg ) | 1.5 |
Round Port ( mm ) |
Ф7-Ф19 |
Cable Entry Ports | 2 & 2 |
Max Capacity of Cores Per Splice Tray |
6 ( Single ) / 12 ( Single ) |
Max Capacity of Splice Trays/ Closure | 2 |
Max Capacity |
12 ( Single ) / 24 ( Single ) |
Sealing Structure of Cable Entry Port | Heat-shrinkable Sealing Structure |
Sealing Structure of Box | Silicon Gum Material |
Accessories
Icon |
Details |
Icon |
Details |
Name: Splice Protective Tube |
Name: Hanging Hook |
||
Type: FPS-01 |
Type:Aerial-hanging or Wall-mounting |
||
Qty:According to the fiber cores |
Qty: 1 Set |
||
Name: Cables Ties |
Name: Heat-shrinkable Tube |
||
Type: 3×100(mm) |
Type: Φ50×150(mm) |
||
Qty: 4×Splice Tray |
Qty: 1 PCS |
||
Name: Heat-shrinkable Tube |
Name: Branch Block |
||
Type: Φ28×150(mm) |
Type: |
||
Qty: 2 PCS |
Qty: 1 PCS |
||
Name: Marking Note |
Name: Hose Clamp |
||
Type: Non-dry Glue |
Type: Φ8-Φ16(mm) |
||
Qty: 4×Fiber Core |
Qty: 4 PCS |
Icon |
Details |
Icon |
Details |
Name: Blast Burner or Welding Gun |
Name: Saw |
||
Type: |
Type: |
||
Qty: 1 PCS |
Qty: 1 PCS |
||
Name: Pliers |
Name: Pliers |
||
Type: |
Type: |
||
Qty: 1 PCS |
Qty: 1 PCS |
||
Name: Minus Screwdriver |
Name: Cross-shaped Screwdriver |
||
Type: |
Type: |
||
Qty: 1 PCS |
Qty: 1 PCS |
||
Name: Scrubber |
|||
Type: | |||
Qty: 1 PCS |
Installation Steps
(0)Check product, Accessories and tools | (1)Saw the entry ports as need. |
(2)Strip the cable as the requirement of installation, and put the heat-shrinkable tube on. | (3)Penetrate the stripped cable to the bracket through the entry ports. |
(4)Bend the strengthen wire by pliers to fix it on the bracket. | (5)Fix the strengthen wire of the cable on the bracket by the cross-shaped screw driver. |
(6) Fix the cable on the bracket by using the minus screwdriver to fast the clamp. | (7) Fix the fibers on the entry part of the splice tray by cables ties. |
(8) Put the optic fiber on the splice tray after splicing and make noting. | (9) Put the dust cap of the splice tray on. |
(10)Sealing of the cable and the base: clean the entry ports and cable with 10cm long by scrubber. | (11) Sand the cable and entry ports that need to heat-shrink by abrasive paper. Wipe the dust that be left after sanding away. |
(12) Bound and even the heat-shrink part with aluminum paper to avoid burn caused by high temperature of blast burner. | (13) Put the heat-shrinkable tube on the entry ports, then, heating by blast burner and stop heating after it is tighten. Let it be cool naturally. |
(14) Usage of branch folk: when heating the oval entry port, folking the heat-shrinkable tube to separate the two cables and heating it follow the steps above. | (15) Sealing: use clean scrubber to clean the base, the part to put silicone rubber ring and silicone rubber ring, then, put the silicone rubber ring on. |
(16) Put the barrel on the base. | (17) Put on the clamp, run the ferris wheel to fix the base and barrel. |
i.Aerial-hanging |
ii.Wall-mounting |
(18) When installing, fix the hanging hook as showing. Fix the closure with steel belt by minus screwdriver, and, fix another steel belt on the aerial-hanging pillar. |
Transportation and Storage
(1) The package of this product adapts to any transportation ways. Avoid collision, drop, direct shower of rain & snow and insolation.
(2) Keep the product in a draughty and dry store, without corrosive gas in.
(3) Storage Temperature Range: -40℃ ~ +60℃